Apex Tool Group

View as Grid List
Sort by

Crescent® 08416N Rectangle Mill File, 6 in L, Single/Smooth Cut

Crescent®, 08416N, Mill File, Rectangle, 6 in Length, Single/Smooth Cut, Coarseness of Cut: American Pattern, 19/32 in Width, 7/64 in Thickness, Tang Handle
$8.33/Each
Total Stock Available : 55

Crescent® 08529N Rectangle Mill File, 8 in L, Single/Second Cut

Crescent®, 08529N, Mill File, Rectangle, 8 in Length, Single/Second Cut, Coarseness of Cut: American Pattern, 25/32 in Width, 9/64 in Thickness, Tang Handle
$8.66/Each
Total Stock Available : 0

Crescent® 08560N Rectangle Mill File, 8 in L, Single/Smooth Cut

Crescent®, 08560N, Mill File, Rectangle, 8 in Length, Single/Smooth Cut, Coarseness of Cut: American Pattern, 25/32 in Width, 9/64 in Thickness, Tang Handle
$9.79/Each
Total Stock Available : 56

Crescent® 08642N Rectangle Mill File, 10 in L, Bastard/Single Cut

Crescent®, 08642N, Mill File, Rectangle, 10 in Length, Bastard/Single Cut, Coarseness of Cut: American Pattern, 7/8 in Width, 11/64 in Thickness, Tang Handle
$8.43/Each
Total Stock Available : 2

Crescent® 08673N Mill File, 10 in L, Single/Second Cut

Crescent®, 08673N, File, Mill, 10 in Length, Single/Second Cut, Coarseness of Cut: American Pattern
$11.07/Each
Total Stock Available : 0

Crescent® 08737N Rectangle Mill File, 12 in L, Bastard/Single Cut

Crescent®, 08737N, Mill File, Rectangle, 12 in Length, Bastard/Single Cut, Coarseness of Cut: American Pattern, 1-5/32 in Width, 7/32 in Thickness, Tang Handle
$13.77/Each
Total Stock Available : 23

Crescent® 08894N Rectangle File, 14 in L, Single/Smooth Cut

Crescent®, 08894N, File, Rectangle, 14 in Length, Single/Smooth Cut, Coarseness of Cut: American Pattern, 1-5/16 in Width, 1/4 in Thickness, Tang Handle
$12.83/Each
Total Stock Available : 26

Crescent® 11716N Round File, 6 in L, Bastard/Single Cut

Crescent®, 11716N, File, Round, 6 in Length, Bastard/Single Cut, Coarseness of Cut: American Pattern, 1/4 in Width, Tang Handle
$6.25/Each
Total Stock Available : 36

Crescent® 11781N Round File, 6 in L, Single/Smooth Cut

Crescent®, 11781N, File, Round, 6 in Length, Single/Smooth Cut, Coarseness of Cut: American Pattern, 1/4 in Width, Tang Handle
$7.79/Each
Total Stock Available : 16

Crescent® 12019 Round File, 10 in L, Bastard/Single Cut

Crescent®, 12019, File, Round, 10 in Length, Bastard/Single Cut, Coarseness of Cut: American Pattern, 3/8 in Width, Tang Handle
$9.74/Each
Total Stock Available : 36

Crescent® 12248 Round Hand File, 14 in L, Bastard/Single Cut

Crescent®, 12248, Hand File, Round, 14 in Length, Bastard/Single Cut, Coarseness of Cut: American Pattern, 5/8 in Width, Tang Handle
$9.15/Each
Total Stock Available : 38

Crescent® 13727M Regular File, 4 in L, Single Cut

Crescent®, 13727M, File, Regular, 4 in Length, Single Cut, Coarseness of Cut: American Pattern, Tang Handle
$3.49/Each
Total Stock Available : 0

Crescent® 14224M Slim Taper File, 6 in L, Bastard/Single Cut

Crescent®, 14224M, Taper File, Slim, 6 in Length, Bastard/Single Cut, Coarseness of Cut: American Pattern, Tang Handle
$4.96/Each
Total Stock Available : 0

Crescent® 14290M Slim Taper File, 8 in L, Bastard/Single Cut

Crescent®, 14290M, Taper File, Slim, 8 in Length, Bastard/Single Cut, Coarseness of Cut: American Pattern, Tang Handle
$7.36/Each
Total Stock Available : 0

Crescent® 14665M Extra Slim Triangular File, 6 in L, Single/Smooth Cut

Crescent®, 14665M, File, Extra Slim Triangular, 6 in Length, Single/Smooth Cut, Coarseness of Cut: American Pattern, Tang Handle
$3.56/Each
Total Stock Available : 6

Crescent® 15925NN Triangular File, 6 in L, Bastard/Double Cut

Crescent®, 15925NN, File, Triangular, 6 in Length, Bastard/Double Cut, Coarseness of Cut: American Pattern, Tang Handle
$5.63/Each
Total Stock Available : 50

Crescent® 15991NN Three Square Hand File, 6 in L, Double/Smooth Cut

Crescent®, 15991NN, Hand File, Three Square, 6 in Length, Double/Smooth Cut, Coarseness of Cut: American Pattern, 15/32 in Width, Tang Handle
$6.91/Each
Total Stock Available : 13

Crescent® 16102NN Triangle File, 8 in L, Single Cut

Crescent®, 16102NN, File, Triangle, 8 in Length, Single Cut, Coarseness of Cut: American Pattern
$7.51/Each
Total Stock Available : 33

Crescent® 21485N File Handle, 1-5/16 in Dia Handle, 4-7/8 in L, File Size Compatibility Cantsaw, Half Round, Hand, Knife, Round, Square and Warding, Wood

Crescent®, 21485N, File Handle, 1-5/16 in Diameter Handle, 4-7/8 in Length, File Size Compatibility: Cantsaw, Half Round, Hand, Knife, Round, Square and Warding, Push-On Attachment, Wood
$3.46/Each
Total Stock Available : 0

Crescent® 22015NN American Pattern Hand File Set With Hang Up Hole, 3 Pieces

Crescent®, 22015NN, Hand File Set With Hang Up Hole, American Pattern, 3 Piece
$11.32/Each
Total Stock Available : 5

Crescent® 22030NN American Pattern Maintenance File Set, 9 Pieces

Crescent®, 22030NN, Maintenance File Set, American Pattern, 9 Piece
$121.41/Each
Total Stock Available : 0

Crescent® 42030L American Pattern Miniature Hobby File Set, 6 Pieces, Fine Cut

Crescent®, 42030L, Hobby File Set, American Pattern Miniature, 6 Piece, Fine Cut
$24.51/Each
Total Stock Available : 0

Crescent® 03533N Flat Hand File, 6 in L, Double/Single/Smooth Cut

Crescent®, 03533N, Hand File, Flat, 6 in Length, Double/Single/Smooth Cut, Coarseness of Cut: American Pattern, 39/64 in Width, 5/32 in Thickness, Tang Handle
$120.60/PACKAGE OF 12
Total Stock Available : 1

Crescent® 13310 Square Hand File, 12 in L, Bastard/Double Cut

Crescent®, 13310, Hand File, Square, 12 in Length, Bastard/Double Cut, Coarseness of Cut: American Pattern, 1/2 in Width, Tang Handle
$121.26/PACKAGE OF 6
Total Stock Available : 0

Armstrong® 21-016 Standard Length Socket, 3/4 in Square Drive, 1/2 in, 6 Points

Armstrong® Socket, Standard Length, Series, Yes Impact Rated, Measurement System, Square Drive, Drive Size, in 3/4, Socket Size, in 1/2, 1.812 Overall Length, Opening Depth in, in 0.35, 1-5/8 Drive End Width, Socket End Width in, in 1, Number of Points, Bolt Clearance Depth, in 3/8, High Alloy Steel, Finish
$43.86/Each
Total Stock Available : 0

Weller® 9400PKS Heavy Duty Soldering Gun Kit, 120 V AC, 100 W/140 W, Pistol Grip Handle

Weller® Soldering Gun Kit, Heavy Duty, 120 V AC, 100 W/140 W Wattage, Pistol Grip Handle
$85.37/Each
Total Stock Available : 0

Weller® TTWB1 Premium Butane Fuel, For Use With Magna-Lite Tools, Portasol® and Pyropen® Cordless Iron, 15.5 to 31.1 deg F Boiling Point

Weller® Butane Fuel, Premium, For Use With: Magna-Lite Tools, Portasol® and Pyropen® Cordless Iron, Specifications: 15.5 to 31.1 deg F Boiling Point
$59.64/PACKAGE OF 12
Total Stock Available : 0

Weller® WPA2 Pyropen® Cordless Professional Grade Self-Igniting Soldering Iron, 25 to 60 W, 0.079 in Tip Dia

Weller® Soldering Iron, Cordless Professional Grade Self-Igniting, Series: Pyropen®, 25 to 60 W, 0.079 in Tip Dia
$278.15/Each
Total Stock Available : 0

Crescent®M1R MetalMaster® Compound Action Aviation Snip, 18 ga Low Carbon Steel Cutting, 1-3/8 in L of Cut, Left/Straight Snip, Molybdenum Steel Blade, High Strength Steel Handle, Non-Slip/Textured Grip

Crescent®Aviation Snip, Compound Action, Series: MetalMaster®, Cutting Capacity: 18 ga Low Carbon Steel, 1-3/8 in Length of Cut, Left/Straight Snip, 9-3/4 in Overall Length, Serrated Blade, 1-3/8 in L Blade, Molybdenum Steel Blade, High Strength Steel Handle, Non-Slip/Textured Grip
$18.51/Each
Total Stock Available : 0

Crescent®M2R MetalMaster® Compound Action Aviation Snip, 18 ga Low Carbon Steel Cutting, 1-3/8 in L of Cut, Right/Straight Snip, Molybdenum Steel Blade, High Strength Steel Handle, Non-Slip/Textured Grip

Crescent®Aviation Snip, Compound Action, Series: MetalMaster®, Cutting Capacity: 18 ga Low Carbon Steel, 1-3/8 in Length of Cut, Right/Straight Snip, 9-3/4 in Overall Length, Serrated Blade, 1-3/8 in L Blade, Molybdenum Steel Blade, High Strength Steel Handle, Non-Slip/Textured Grip
$18.51/Each
Total Stock Available : 0

Weller® R181N Screwdriver With Pocket Clip, 1/8 in Slotted Point, Chrome Vanadium Steel Shank, 4-1/4 in OAL, Plastic Handle, Specifications Met: AISI 6150

Weller® Screwdriver, Measurement System: Imperial, Slotted Point, 1/8 in Point, 4-1/4 in Overall Length, Round Shank, 2 in Shank Length, Chrome Vanadium Steel Shank, 1/8 in Blade Width, Specifications Met: AISI 6150, No, Standard Handle, Plastic Handle, Chrome Vanadium Steel, Red
$6.09/Each
Total Stock Available : 0

Weller® R3322N Screwdriver With Pocket Clip, 3/32 in Slotted Point, Chrome Vanadium Steel Shank, 4-1/4 in OAL, Plastic Handle, Specifications Met: AISI 6150

Weller® Screwdriver, Measurement System: Imperial, Slotted Point, 3/32 in Point, 4-1/4 in Overall Length, Round Shank, 2 in Shank Length, Chrome Vanadium Steel Shank, 3/32 in Blade Width, Specifications Met: AISI 6150, No, No ESD-Safe, Standard Handle, Plastic Handle, Chrome Vanadium Steel, Green
$6.52/Each
Total Stock Available : 0

Weller® TS54N Heavy Duty Diagonal Lead Cutter, 0.005 in, 0.034 in Nominal, 5/8 in L x 37/64 in W x 3/8 in THK Jaw Beveled/Oval Jaw, 4-1/2 in OAL, Single Cut

Weller®, TS54N, Diagonal Lead Cutter, Heavy Duty, 0.005 in, 0.034 in Nominal, Beveled/Oval Jaw, 5/8 in L x 37/64 in W x 3/8 in THK Jaw, Single Cut, 4-1/2 in Overall Length, Cushion Grip Handle, Foam Handle, Polished, Green, Applicable Materials: Soft Copper Wire and Steel Wire
$16.16/Each
Total Stock Available : 12

Crescent® CB08BL Chalk Refill, Black, 8 oz Capacity, Bottle Package

Crescent®, CB08BL, Chalk Refill, Black, 8 oz Capacity, Bottle Package Type, 2 H x 2.75 W in Dimensions
$4.37/Each
Total Stock Available : 0

Crescent® DKB446X Deck Removal Bull Bar, 44 in OAL, Alloy Steel

Crescent® Bull Bar, Deck Removal, 44 in Overall Length, Textured Steel Handle, Alloy Steel, Powder Coated
$103.69/Each
Total Stock Available : 0

Campbell® T7605511 Double End Bolt Snap, 70 lb Load, 13/32 in Eye, 4-1/8 in OAL, Malleable Iron

Campbell® Bolt Snap, Double End, 70 lb, 13/32 in Eye, 4-1/8 in Overall Length, Spring Loaded Plunger Locking System, Open Eye Mount, Malleable Iron, Galvanized/Zinc Plated
$52.16/PACKAGE OF 10
Total Stock Available : 0

Campbell® T0120300 Proof Coil Chain, 3/16 in Trade, 30 Grade, 500 ft L, 800 lb Load

Campbell® Proof Coil Chain, 30 Grade, 3/16 in, 500 ft Length, 800 lb, Low Carbon Steel, Galvanized
$1.13/FOOT
Total Stock Available : 0

Campbell® T0140333 System 3 Welded Proof Coil Chain, Single Loop/Straight Link, 3/16 in Trade, 30 Grade, 250 ft L, 800 lb Load

Campbell® Proof Coil Chain, Welded, Series: System 3, Single Loop/Straight Link, 30 Grade, 3/16 in, 250 ft Length, 800 lb, Low Carbon Steel, Galvanized
$370.02/Each
Total Stock Available : 0

Campbell® T0140433 System 3 Welded Proof Coil Chain, Single Loop/Straight Link, 1/4 in Trade, 30 Grade, 141 ft L, 1300 lb Load

Campbell® Proof Coil Chain, Welded, Series: System 3, Single Loop/Straight Link, 30 Grade, 1/4 in, 141 ft Length, 1300 lb, Low Carbon Steel, Galvanized
$2.34/FOOT
Total Stock Available : 0

Campbell® T0143336 System 3 Welded Proof Coil Chain, Single Loop/Straight Link, 3/16 in Trade, 30 Grade, 150 ft L, 800 lb Load

Campbell® Proof Coil Chain, Welded, Series: System 3, Single Loop/Straight Link, 30 Grade, 3/16 in, 150 ft Length, 800 lb, Low Carbon Steel, Galvanized
$223.45/Each
Total Stock Available : 0

Campbell® T0143426 System 3 Welded Proof Coil Chain, Single Loop/Straight Link, 1/4 in Trade, 30 Grade, 100 ft L, 1300 lb Load

Campbell® Proof Coil Chain, Welded, Series: System 3, Single Loop/Straight Link, 30 Grade, 1/4 in, 100 ft Length, 1300 lb, Low Carbon Steel, Zinc Plated
$163.22/Each
Total Stock Available : 0

Campbell® T0143536 System 3 Welded Proof Coil Chain, Single Loop/Straight Link, 5/16 in Trade, 30 Grade, 75 ft L, 1900 lb Load

Campbell® Proof Coil Chain, Welded, Series: System 3, Single Loop/Straight Link, 30 Grade, 5/16 in, 75 ft Length, 1900 lb, Low Carbon Steel, Galvanized
$1.69/FOOT
Total Stock Available : 75

Campbell® T0311024 Welded Machine Chain, Straight Link, #1/0 Trade, 100 ft L, 465 lb Load

Campbell® Machine Chain, Welded, Straight Link, #1/0, 100 ft Length, 465 lb, Low Carbon Steel, Zinc Plated
$1.72/FOOT
Total Stock Available : 0

Campbell® T0315024 Welded Machine Chain, Straight Link, #5/0 Trade, 100 ft L, 925 lb Load

Campbell® Machine Chain, Welded, Straight Link, #5/0, 100 ft Length, 925 lb, Low Carbon Steel, Zinc Plated
$2.73/FOOT
Total Stock Available : 0

Campbell® T0320324 Welded Machine Chain, Twisted Link, #3 Trade, 100 ft L, 255 lb Load

Campbell® Machine Chain, Welded, Twisted Link, #3, 100 ft Length, 255 lb, Low Carbon Steel, Zinc Plated
$3.38/Each
Total Stock Available : 0

Campbell® T0334024 Welded Coil Chain, Straight Link, #4/0 Trade, 100 ft L, 670 lb Load

Campbell® Coil Chain, Welded, Straight Link, #4/0, 100 ft Length, 670 lb, Low Carbon Steel, Zinc Plated
$194.44/100 FEET
Total Stock Available : 0

Campbell® T0510413 System 7 Welded Transport Chain, Single Loop/Straight Link, 1/4 in Trade, 70 Grade, 150 ft L, 3150 lb Load

Campbell® Transport Chain, Welded, Series: System 7, Single Loop/Straight Link, 70 Grade, 1/4 in, 150 ft Length, 3150 lb, Heat Treated Carbon Steel, Electro-Plated Zinc/Yellow Chromate
$584.13/Each
Total Stock Available : 0

Campbell® T0750224 Weldless Inco Chain, Double Loop Link, #2 Trade, 100 ft L, 115 lb Load

Campbell® Inco Chain, Weldless, Double Loop Link, #2 Trade, 100 ft Length, 115 lb Load, Low Carbon Steel, Zinc Plated
$56.36/Each
Total Stock Available : 0

Campbell® 6423000 GX Series Plate Clamp, 0.5 ton Load, 1/16 to 5/8 in Jaw Opening, 4 in OAW, Forged Steel, Load Activated Locking

Campbell® Plate Clamp, Series: GX Series, 0.5 ton, 1/16 to 5/8 in Jaw Opening, 2-3/4 in Bail Opening Height, 2 in Bail Opening Width, 4 in Overall Width, Load Activated Locking, Forged Steel
$462.93/Each
Total Stock Available : 0

Campbell® 6990534 1000-G Wire Rope Clip, 5/16 in Cable, Forged Carbon Steel, 2 Clips

Campbell® Wire Rope Clip, Series: 1000-G, 5/16 in Cable, Forged Carbon Steel, 2 Clips Minimum, 30 ft-lb Minimum, Galvanized/Zinc Plated
$5.42/Each
Total Stock Available : 0

Campbell® T0120300 Proof Coil Chain, 3/16 in Trade, 30 Grade, 500 ft L, 800 lb Load

Campbell® Proof Coil Chain, 30 Grade, 3/16 in, 500 ft Length, 800 lb, Low Carbon Steel, Galvanized
$1.13/FOOT
Total Stock Available : 0

Campbell® T0741034 Wrapped Chain, Lock/Single Loop Link, #1/0 Trade, 100 ft L, 265 lb Load

Campbell® Chain, Wrapped, Lock/Single Loop Link, #1/0, 100 ft Length, 265 lb, Low Carbon Steel, Galvanized
$1.11/FOOT
Total Stock Available : 0

Campbell® T0743024 Wrapped Chain, Lock/Single Loop Link, #3/0 Trade, 100 ft L, 405 lb Load

Campbell® Chain, Wrapped, Lock/Single Loop Link, #3/0, 100 ft Length, 405 lb, Low Carbon Steel, Zinc Plated
$1.17/FOOT
Total Stock Available : 0

Campbell® T0744037 Wrapped Chain, Lock/Single Loop Link, #4/0 Trade, 100 ft L, 485 lb Load

Campbell® Chain, Wrapped, Lock/Single Loop Link, #4/0, 100 ft Length, 485 lb, Low Carbon Steel, Galvanized
$165.46/ROLL OF 100FT
Total Stock Available : 0

Campbell® T7645026 Spring Snap Link, 160 lb Load, 3/8 in Snap, 0.44 in Eye, 2.76 in OAL, Steel

Campbell® Spring Snap Link, 160 lb, 3/8 in Snap Opening, 0.44 in Eye, 2.76 in Overall Length, Steel, Zinc Plated
$3.99/Each
Total Stock Available : 0

Campbell® T7645146V Quick Link, 3/8 in, 3.21 in OAL, 2200 lb Load, Zinc Plated

Campbell® Quick Link, 3/8 in, 3.21 in Overall Length, 2200 lb, 0.45 in Snap Opening, 0.35 in Stock Thickness, Steel, Zinc Plated, 0.81 in W
$4.29/Each
Total Stock Available : 0

Cleco® 75RNL-2X-6 75 Series Right Angle Pneumatic Nutrunner, 3/4 in Drive, 325 ft-lb Torque, 90 rpm Speed, 90 psi, 70 scfm Short Run Air Consumption, Tool Only

Cleco® Pneumatic Nutrunner, Right Angle, Series: 75 Series, 3/4 in Drive, Square Drive, 325 ft-lb Torque, 90 rpm Speed, 90 psi Air, 1/2 in Air Inlet, Lever Start/Collar Reverse Throttle, 5/8 in Minimum Hose, 70 scfm Short Run Air Consumption, 20.1 in L Dimensions
$8,342.14/Each
Total Stock Available : 0

Crescent® 21511N File Handle, 1-5/16 in Dia Handle, 3-3/4 in L, File Size Compatibility Half Round, Round and Square File, Wood, Yellow

Crescent®, 21511N, File Handle, 1-5/16 in Diameter Handle, 3-3/4 in Length, File Size Compatibility: Half Round, Round and Square File, Push-On Attachment, Wood, Yellow
$2.74/Each
Total Stock Available : 0

Crescent® AC212VS Adjustable Wrench, 1-1/2 in, Polished Chrome, 12 in OAL, Heat Treated Alloy Steel Body, Heat Treated Alloy Steel

Crescent® Adjustable Wrench, 1-1/2 in Wrench Opening, 12 in Overall Length, 3-1/2 in Jaw Width, 1/2 in Jaw Thickness, Non-Cushion Grip, Heat Treated Alloy Steel Body, Heat Treated Alloy Steel, Polished Chrome
$23.57/Each
Total Stock Available : 0

Crescent® AC224BK Adjustable Wrench, 2-7/16 in, Polished Chrome, 24 in OAL, Heat Treated Alloy Steel Body, Heat Treated Alloy Steel

Crescent® Adjustable Wrench, 2-7/16 in Wrench Opening, 24 in Overall Length, 5.9 in Jaw Width, 0.88 in Jaw Thickness, Tapered Non-Cushion Grip, Heat Treated Alloy Steel Body, Heat Treated Alloy Steel, Polished Chrome
$143.43/Each
Total Stock Available : 0

Crescent® AC24VS Adjustable Wrench, 1/2 in, Polished Chrome, 4 in OAL, Heat Treated Alloy Steel Body, Heat Treated Alloy Steel

Crescent® Adjustable Wrench, 1/2 in Wrench Opening, 4 in Overall Length, 1.22 in Jaw Width, 0.2 in Jaw Thickness, Non-Cushion Grip, Heat Treated Alloy Steel Body, Heat Treated Alloy Steel, Polished Chrome
$13.20/Each
Total Stock Available : 0

Crescent® AC3PC Standard Length Adjustable Wrench Set, 3 Pieces, 6 to 10 in, Satin Chrome/Polished

Crescent® Adjustable Wrench Set, Standard Length, Imperial/Metric System of Measurement, 6 to 10 in, 3 Piece, 5/16 in, 1-1/8 in, 1-5/16 in Jaw, Alloy Steel, Satin Chrome/Polished
$54.64/Each
Total Stock Available : 0

Crescent® C10CVN-08 Locking Pliers, 1.875 in Nominal, 1.25 L x 2.15 W x 0.56 T in Jaw Alloy Steel Jaw Curved Jaw, 10 in OAL, ASME

Crescent®, C10CVN-08, Locking Pliers, 1.875 in Nominal, Curved Jaw, 1.25 L x 2.15 W x 0.56 T in Jaw, Alloy Steel Jaw, 10 in Overall Length, Cutter Included: Yes, Specifications Met: ASME, 6 in Handle Length, Nickel Plated, Rawhide
$13.59/Each
Total Stock Available : 0

Crescent® C10SVN-08 Locking Pliers, 1.875 in Nominal, 1.25 L x 2.15 W x 0.56 T in Jaw Alloy Steel Jaw Long Nose Jaw, 10 in OAL, ASME

Crescent®, C10SVN-08, Locking Pliers, 1.875 in Nominal, Long Nose Jaw, 1.25 L x 2.15 W x 0.56 T in Jaw, Alloy Steel Jaw, 10 in Overall Length, Cutter Included: Yes, Specifications Met: ASME, 6 in Handle Length, Nickel Plated, Rawhide
$12.23/Each
Total Stock Available : 17

Crescent® C6NVN-08 Locking Pliers, 2.25 in Nominal, 1.87 L x 1.15 W x 0.30 T in Jaw Alloy Steel Jaw Long Nose Jaw, 6 in OAL, ASME

Crescent®, C6NVN-08, Locking Pliers, 2.25 in Nominal, Long Nose Jaw, 1.87 L x 1.15 W x 0.30 T in Jaw, Alloy Steel Jaw, 6 in Overall Length, Cutter Included: Yes, Specifications Met: ASME, 4 in Handle Length, Nickel Plated, Rawhide
$10.69/Each
Total Stock Available : 0

Crescent® CDTPR6PCSET Standard Screwdriver Set, 6 Pieces, ASME Specified, Alloy Steel, Diamond Tip

Crescent®, CDTPR6PCSET, Screwdriver Set, Standard, 6 Piece, Acetate Handle, Screwdriver Types Included: Phillips®/Slotted, Insulated: No, Magnetized Tip: Yes, Specifications Met: ASME Specified, For Use With: Wrenches for Additional Torque, Specifications: Round Shank Shape, Alloy Steel, Diamond Tip, Black/Rawhide, 6 in L Dimensions
$12.47/Each
Total Stock Available : 1

Crescent® CTK180 Professional Tool Set, 1/4, 3/8 in Drive, 180 Pieces, Alloy Steel, Full Polish Chrome

Crescent®, CTK180, Professional Tool Set, Measurement System: Imperial/Metric, 1/4, 3/8 in Drive, 6 Points, Standard Handle, 180 Piece, Yes Quick Release Head, Specifications Met: ANSI/ASME, Alloy Steel, Full Polish Chrome
$214.16/Each
Total Stock Available : 0

Crescent®CW7T Utility Shears, 7.5 in OAL, Glass Filled Nylon Handle, Right/Left Hand

Crescent®, CW7T, Shears, Utility, Serrated Blade, 2 in Blade, 7.5 in Overall Length, Ergonomic Handle, Glass Filled Nylon Handle, Right/Left Hand, Applicable Materials: Vinyl/Plastics/Cardboard/Rope/Wire/Cable/Siding/Roofing, Titanium Coated, Rawhide
$14.59/Each
Total Stock Available : 0

Crescent® CWCHS3 Chisel Set, Metal Tip, Co-Mold Comfort Handle

Crescent®, CWCHS3, Chisel Set, Metal Tip, Co-Mold Comfort Handle, Non-Sparking: No, Yes Corrosion-Resistant, Carbon Steel
$31.43/Each
Total Stock Available : 0

Crescent® RT210CVN-05 Tongue and Groove Pliers, ASME, 1.66 in Nominal, 1.07 L x 1.33 W x 0.30 T in Jaw Alloy Steel Jaw Straight Jaw, 10 in OAL

Crescent®, RT210CVN-05, Tongue and Groove Pliers, 1.66 in Nominal, Straight Jaw, 1.07 L x 1.33 W x 0.30 T in Jaw, Alloy Steel Jaw, 10 in Overall Length, Specifications Met: ASME, 5.69 in Handle Length, Professional Dipped Handle, Black Oxide, Rawhide
$11.45/Each
Total Stock Available : 0

Crescent® 1-320993 Heavy Duty Plate Caster Set With Brakes, 3600 lb Load, 6 in Dia, Solid Polypropylene

Crescent® Plate Caster Set, Heavy Duty, 3600 lb Load, 6 in Wheel Diameter, Solid Polypropylene Wheel, Bolted-On Mounting, Steel Frame
$155.99/PACKAGE OF 4
Total Stock Available : 0

Crescent® 1-510990 Mobile Field Office, 80 in x 33 in W x 63 in D, 90.9 cu-ft Storage, Steel

Crescent® Mobile Field Office, 33 in Overall Width, 63 in Overall Depth, 80 in Overall Height, 90.9 cu-ft Storage, 16 ga, Steel, Brown, Powder Coated
$5,197.21/Each
Total Stock Available : 0

Crescent® 1-657990 Drop Front High Capacity Jobsite Chest, 45 in x 31 in W x 60 in D, 41.5 cu-ft Storage, Steel

Crescent® Jobsite Chest, Drop Front High Capacity, 31 in Overall Width, 60 in Overall Depth, 45 in Overall Height, 41.5 cu-ft Storage, 16 ga, Recessed, Steel, Brown, Textured Powder Painted
$2,189.26/Each
Total Stock Available : 0

Crescent® 1-693990 Extra Heavy Duty Jobsite Bin Cabinet, 61 in x 24 in W x 72 in D, 49 cu-ft Storage, Steel

Crescent® Jobsite Bin Cabinet, Extra Heavy Duty, 24 in Overall Width, 72 in Overall Depth, 61 in Overall Height, 49 cu-ft Storage, 16 ga, Recessed, Steel, Brown, Textured Powder Painted
$3,002.55/Each
Total Stock Available : 5

Crescent® 1-697990 2-Door Heavy Duty Open Side Jobsite Storage Cabinet, 60-3/4 in x 24-1/4 in W x 60.13 in D, 47.5 cu-ft Storage, Steel

Crescent® Jobsite Storage Cabinet, 2-Door Heavy Duty Open Side, 24-1/4 in Overall Width, 60.13 in Overall Depth, 60-3/4 in Overall Height, 47.5 cu-ft Storage, 16 ga, Recessed, Steel, Brown, Textured Powder Painted
$2,383.97/Each
Total Stock Available : 0

Crescent® Site-Vault™ 2-651990 Heavy Duty Chest Jobsite Box, 20 in H x 30 in W x 20 in D

Crescent® Site-Vault™ Jobsite Box, Heavy Duty Chest, 30 in Width, 20 in Depth, 20 in Height, 5 cu-ft Capacity, Ergonomic/Lifting/Recessed Handle, Steel, Brown
$746.47/Each
Total Stock Available : 0

Crescent® Site-Vault™ 2-653990 Heavy Duty Chest Jobsite Box, 28 in H x 42 in W x 20 in D

Crescent® Site-Vault™ Jobsite Box, Heavy Duty Chest, 42 in Width, 20 in Depth, 28 in Height, 10.5 cu-ft Capacity, Ergonomic/Lifting/Recessed Handle, Steel, Brown
$787.20/Each
Total Stock Available : 0

Crescent® Site-Vault™ 2-656990 Heavy Duty Chest High Capacity Jobsite Box, 37 in H x 48 in W x 30 in D

Crescent® Site-Vault™ Jobsite Box, Heavy Duty Chest High Capacity, 48 in Width, 30 in Depth, 37 in Height, 25.6 cu-ft Capacity, Ergonomic/Lifting/Recessed Handle, Steel, Brown
$1,147.89/Each
Total Stock Available : 0

Crescent® Site-Vault™ 2-683990-01 Jobsite Piano Box, 51 in H x 60 in W x 31 in D

Crescent® Site-Vault™ Jobsite Piano Box, 60 in Width, 31 in Depth, 51 in Height, 48.9 cu-ft Capacity, Ergonomic/Lifting/Recessed Handle, Steel, Brown
$2,370.82/Each
Total Stock Available : 0

Crescent® Site-Vault™ 2-685990-01 Jobsite Piano Box, 64 in H x 74 in W x 35 in D

Crescent® Site-Vault™ Jobsite Piano Box, 74 in Width, 35 in Depth, 64 in Height, 87.4 cu-ft Capacity, Ergonomic/Lifting/Recessed Handle, Steel, Brown
$2,798.32/Each
Total Stock Available : 8

Crescent® Site-Vault™ 2-689990-01 Jobsite Piano Box, 51 in H x 74 in W x 31 in D

Crescent® Site-Vault™ Jobsite Piano Box, 74 in Width, 31 in Depth, 51 in Height, 60.3 cu-ft Capacity, Ergonomic/Lifting/Recessed Handle, Steel, Brown
$1,964.74/Each
Total Stock Available : 0

Campbell® 3991408 916-U Universal Replacement Latch Kit, Zinc Plated, For Use With Campbell #12-32 Hooks

Campbell® Replacement Latch Kit, Universal, Series: 916-U, For Use with: Campbell #12-32 Hooks, Zinc Plated, 3-7/16 in L x 2 in W
$53.43/Each
Total Stock Available : 0

Crescent® Champion Fuel-N-Tool™ 433000 Heavy Duty Combo Liquid Transfer Tank With Removable Chest, Aluminum, Silver

Crescent® Champion Fuel-N-Tool™ Combo Liquid Transfer Tank, Heavy Duty, For Use with: Full Compact Truck, 72 gal Capacity, Aluminum, Silver, 31 in W x 48-1/4 in D x 19 in H
$2,111.35/Each
Total Stock Available : 0

Crescent® 677990 Rolling Work Bench, 43.88 in L x 26.88 in W x 40.63 in H, 24.6 cu-ft Load, Brown

Crescent® Rolling Work Bench, 43.88 in Overall Length, 26.88 in Overall Width, 40.63 in Overall Height, 24.6 cu-ft, 5 Shelves, (2) Fixed/(2) Lockable Swivel Caster, 18 ga Gauge Thickness, Heavy Duty Push, Steel, Brown
$3,122.39/Each
Total Stock Available : 0

Crescent® 678990 Rolling Work Bench, 43.88 in L x 26.88 in W x 40.63 in H, 24.6 cu-ft Load, Brown

Crescent® Rolling Work Bench, 43.88 in Overall Length, 26.88 in Overall Width, 40.63 in Overall Height, 24.6 cu-ft, 1 Shelves, 6 Drawers, 2-1/2 to 4 in D Drawer, (2) Fixed/(2) Lockable Swivel Caster, 18 ga Gauge Thickness, Heavy Duty Push, Steel, Brown
$3,352.53/Each
Total Stock Available : 0

Crescent® 794980 Underbed Truck Box, 18 in H x 18 in W x 60 in D, White

Crescent® Underbed Truck Box, 18 in Overall Width, 60 in Overall Depth, 18 in Overall Height, White, T-Handle, Steel, Powder Coated
$615.41/Each
Total Stock Available : 0

Crescent® 82936 Touch Up Paint, For Use With All Jobox® Models, 12 oz Can, Red/Rust

Crescent® Touch Up Paint, For Use with: All Jobox® Models, 12 oz Can, Red/Rust
$55.63/Each
Total Stock Available : 0

Campbell® T0181613 System 4 Welded High Test Chain, Single Loop/Straight Link, 3/8 in Trade, 43 Grade, 75 ft L, 5400 lb Load

Campbell®, T0181613, High Test Chain, Welded, Series: System 4, Single Loop/Straight Link, 43 Grade, 3/8 in Trade, 75 ft Length, 5400 lb Load, Carbon Steel, Bright
Call for pricing
Total Stock Available : 0

Campbell® T0180812 High Test Chain, Straight Link, 1/2 in Trade, 43 Grade, 200 ft L, 9200 lb Load

Campbell®, T0180812, Chain, High Test, Straight Link, 43 Grade, 1/2 in Trade, 200 ft Length, 9200 lb Load, Carbon Steel, Bright
Call for pricing
Total Stock Available : 0

Campbell® T0893524N Sash Chain, #35 Trade, 100 ft L, 106 lb Load

Campbell® Sash Chain, #35 Trade, 100 ft Length, 106 lb Load, Carbon Steel, Zinc Plated
Call for pricing
Total Stock Available : 0

GEARWRENCH® 1708DD Stud Extractor, Square Drive, 1/2 in Drill

GEARWRENCH® Stud Extractor, Measurement System: Imperial, Square Drive, 1/2 in Drill, 3/4 in Large End Dia, 1/4 in Small End Dia
$36.98/Each
Total Stock Available : 0

GEARWRENCH® 35720 Ratcheting Wrench Set, 20 Pieces, Polished Chrome/Nickel Plated

GEARWRENCH® Wrench Set, Ratcheting, Imperial/Metric System of Measurement, 20 Piece, Polished Chrome Vanadium Steel, Polished Chrome/Nickel Plated
$116.83/Each
Total Stock Available : 0

GearWrench® Auto-Bite™ 82594C 4-Piece Tether Ready Tongue and Groove Plier, Alloy Steel V-Jaw Jaw

GearWrench® Auto-Bite™ Tongue and Groove Plier, 4-Piece Tether Ready, V-Jaw Jaw, Alloy Steel Jaw, Non-Sparking: No, Insulated: No Grip, Ergonomic/Straight Handle, Polished, Black/Molten Orange®
$78.19/Each
Total Stock Available : 0

GearWrench® 35720-06 12-Point Ratcheting Combination Wrench Set, 20 Pieces

GearWrench® Combination Wrench Set, 12-Point Ratcheting, Imperial/Metric System of Measurement, 20 Piece, Alloy Steel, Silver
$116.83/Each
Total Stock Available : 0

GEARWRENCH® 3880 Tap and Die Set, 5 Pieces

GEARWRENCH® Tap and Die Set, 5 Piece, Carbon Steel Tap, Carbon Steel Die
$81.92/Each
Total Stock Available : 0

GEARWRENCH® 41850 Offset Push Pin Plier Set, 3 Pieces

GEARWRENCH® Plier Set, Offset Push Pin, 3 Piece, Steel, Black
$63.87/Each
Total Stock Available : 0

GEARWRENCH® 68-532G Dead Blow Hammer, 13.62 in OAL, 1-3/4 in Dia Ball Peen Face, 1.95 lb Steel Head, Polyurethane Handle

GEARWRENCH® Dead Blow Hammer, 13.62 in Overall Length, Ball Peen Face, 1-3/4 in Face Dia, 1.95 lb Head, Steel Head, 4.812 in Head Length, Flanged Butt End/Textured Handle, Polyurethane Handle, Comfort Grip/Non-Slip Grip
$98.33/Each
Total Stock Available : 0

GEARWRENCH® 69-552G 1-Piece Dead Blow Hammer, 30 in OAL, 3-1/4 in Dia Sledge Face, 6.65 lb Hot Cast Urethane Head, Polyurethane Handle

GEARWRENCH® Dead Blow Hammer, 1-Piece, 30 in Overall Length, Sledge Face, 3-1/4 in Face Dia, 6.65 lb Head, Hot Cast Urethane Head, 8 in Head Length, Flanged Butt End/Textured Handle, Polyurethane Handle, Non-Slip Grip
$177.01/Each
Total Stock Available : 0

GEARWRENCH® 70-201G Drift Punch, 3/8 in Flat Tip, 15 in OAL, Alloy Steel Tip

GEARWRENCH® Drift Punch, 3/8 in Tip, Flat Tip, Alloy Steel Tip, 15 in Overall Length, Alloy Steel Handle
$25.43/Each
Total Stock Available : 4

GEARWRENCH® 70-503G Aligning Pry Bar, Angled/Pinch Tip, 16 in OAL, Alloy Steel

GEARWRENCH® Pry Bar, Aligning, Angled/Pinch Tip, 3 in Tip Length, 16 in Overall Length, 5/8 in Dia, Alloy Steel Handle, Alloy Steel, Black Oxide
$22.92/Each
Total Stock Available : 0
Refine
×