Holemaking
Holemaking is a machining operation that are specifically used to cut a hole into a workpiece. Drilling, reaming, tapping, boring are different hole making operations.
CS Unitec 4CB204UF 4CB Wet Diamond Core Drill Bit, 8 in Drill - Decimal Inch
CS Unitec, 4CB204UF, Diamond Core Drill Bit, Wet, Series: 4CB, 8 in Drill - Decimal Inch, 12 in Cutting Depth
Call for pricing
Total Stock Available : 0 |
CS Unitec - BDS 6-1-280 6 Series Durability Annular Cutter, 2-1/2 in Dia Cutter, 2 in D Cutting, HSS, Weldon Shank
CS Unitec - BDS, 6-1-280, Annular Cutter, Durability, Series: 6 Series, 2-1/2 in Diameter Cutter, 2 in Cutting Depth, 3/4 in Shank, Weldon Shank, HSS
Call for pricing
Total Stock Available : 0 |
CS Unitec 9-1-280 C 9 Series High Quality Hornet Annular Cutter, 2-1/2 in Dia Cutter, 2 in D Cutting, Weldon Shank
CS Unitec, 9-1-280 C, Hornet Annular Cutter, High Quality, Series: 9 Series, 2-1/2 in Diameter Cutter, 2 in Cutting Depth, 3/4 in Shank, Weldon Shank, Tungsten Carbide Cutting Edge, Applicable Materials: Metal, Steel
Call for pricing
Total Stock Available : 0 |
DeWALT® Impact Ready® DWA1790IR Step Drill Bit Set, 1/8 in Min Drill Bit, 7/8 in Max Drill Bit, 3 Pieces, For Use With Rotary Drills, Titanium
DeWALT® Impact Ready® Step Drill Bit Set, System of Measurement: Imperial, 1/8 in Minimum Drill Bit, 7/8 in Maximum Drill Bit, 3 Piece, 1/4 in Hex Shank, For Use With: Rotary Drills, Titanium
Call for pricing
Total Stock Available : 0 |
Drillco 1000A153 Imperial Silver and Deming Drill, 53/64 in Drill - Fraction, 0.8281 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000, 53/64 in Drill Size - Fraction, 0.8281 in Drill Size - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split Point, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000A32 Silver and Deming Drill Set, 1/2 in Min Drill Bit, 1 in Max Drill Bit, 118 deg Drill Point Angle, 32 Pieces, HSS, Uncoated
Drillco Silver and Deming Drill Set, Series: 1000A, Imperial System of Measurement, 1/2 in Minimum Drill Bit Size, 1 in Maximum Drill Bit Size, 118 deg Drill Point Angle, 32 Piece, Specifications: 1/2 in Reduced Shank, HSS, Uncoated
Call for pricing
Total Stock Available : 0 |
Drillco 1000C8 Silver and Deming Drill Set, 9/16 in Min Drill Bit, 1 in Max Drill Bit, 118 deg Drill Point Angle, 8 Pieces, Cobalt, Oxide Treated
Drillco Silver and Deming Drill Set, Series: 1000C, Imperial System of Measurement, 9/16 in Minimum Drill Bit Size, 1 in Maximum Drill Bit Size, 118 deg Drill Point Angle, 8 Piece, Specifications: 1/2 in Reduced Shank, Cobalt, Oxide Treated
Call for pricing
Total Stock Available : 0 |
Drillco 1000E148 Imperial Silver and Deming Drill, 3/4 in Drill - Fraction, 0.75 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000E, 3/4 in Drill - Fraction, 0.75 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced with 3-Flat Shank, 118 deg Point, Conventional/Split Point, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000E222 Imperial Silver and Deming Drill, 1-11/32 in Drill - Fraction, 1.3438 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000E, 1-11/32 in Drill - Fraction, 1.3438 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced with 3-Flat Shank, 118 deg Point, Conventional/Split Point, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000EC159 Imperial Silver and Deming Drill, 59/64 in Drill - Fraction, 0.9219 in Drill - Decimal Inch, 1/2 in Shank, Cobalt
Drillco Silver and Deming Drill, Imperial, Series: 1000EC, 59/64 in Drill - Fraction, 0.9219 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 135 deg Point, Split/Self-Centering Point, Cobalt Cutting Edge, Cobalt, Oxide Treated, Applicable Materials: Tough and High Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000F145 Imperial Silver and Deming Drill, 45/64 in Drill - Fraction, 0.7031 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000F, 45/64 in Drill - Fraction, 0.7031 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced with 3-Flat Shank, 118 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000F208 Imperial Silver and Deming Drill, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000F, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced with 3-Flat Shank, 118 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000F224 Imperial Silver and Deming Drill, 1-3/8 in Drill - Fraction, 1.375 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000F, 1-3/8 in Drill - Fraction, 1.375 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced with 3-Flat Shank, 118 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000F232 Imperial Silver and Deming Drill, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000F, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced with 3-Flat Shank, 118 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N139 Imperial Silver and Deming Drill, 39/64 in Drill - Fraction, 0.6094 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 39/64 in Drill - Fraction, 0.6094 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N141 Imperial Silver and Deming Drill, 41/64 in Drill - Fraction, 0.6406 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 41/64 in Drill - Fraction, 0.6406 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N145 Imperial Silver and Deming Drill, 45/64 in Drill - Fraction, 0.7031 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 45/64 in Drill - Fraction, 0.7031 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N149 Imperial Silver and Deming Drill, 49/64 in Drill - Fraction, 0.7656 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 49/64 in Drill - Fraction, 0.7656 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N151 Imperial Silver and Deming Drill, 51/64 in Drill - Fraction, 0.7969 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 51/64 in Drill - Fraction, 0.7969 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N154 Imperial Silver and Deming Drill, 27/32 in Drill - Fraction, 0.8438 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 27/32 in Drill - Fraction, 0.8438 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N155 Imperial Silver and Deming Drill, 55/64 in Drill - Fraction, 0.8594 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 55/64 in Drill - Fraction, 0.8594 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N156 Imperial Silver and Deming Drill, 7/8 in Drill - Fraction, 0.875 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 7/8 in Drill - Fraction, 0.875 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N158 Imperial Silver and Deming Drill, 29/32 in Drill - Fraction, 0.9062 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 29/32 in Drill - Fraction, 0.9062 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N164 Imperial Silver and Deming Drill, 1 in Drill - Fraction, 1 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 1 in Drill - Fraction, 1 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
Drillco 100SE15 Jobber Length Drill Set, 1/16 in Min Drill Bit, 1/2 in Max Drill Bit, 118 deg Drill Point Angle, 15 Pieces, HSS, Oxide Treated
Drillco Jobber Length Drill Set, Series: 100SE, Imperial System of Measurement, 1/16 in Minimum Drill Bit Size, 1/2 in Maximum Drill Bit Size, 118 deg Drill Point Angle, 15 Piece, Specifications: Straight Shank, HSS, Oxide Treated
Call for pricing
Total Stock Available : 0 |
Refine