Ingersoll Rand

Ingersoll Rand, 231-TK2, Tune-Up Kit, For Use With: Ingersoll Rand 231 Series Impact Wrench

Ingersoll Rand, 231-TK3, Tune-Up Kit, For Use With: Ingersoll Rand 231 Series Impact Wrench

Ingersoll-Rand Air Impact Wrench, General Duty, Tool/Kit: Bare Tool, Hog Ring/Square Drive, 1/2 in Drive, 625 ft-lb, 10000 rpm, 5.4 cfm, 90 psi Air, 1/4 in NPTF in NPTF Air Inlet, 3/8 in Minimum Hose Size, Pistol Grip, 105 dBA, 7-2/7 in Overall Length

Ingersoll Rand, 24SR-207, Lock Clip, For Use With: Ingersoll Rand W, A, D, MDT3-EU Series Chipping Hammer

Ingersoll Rand, 280-265, Trigger Pin, For Use With: Ingersoll Rand 3940 and 3942 Series Impact Wrench

Ingersoll-Rand Impact Wrench, Heavy Duty, Tool/Kit: Bare Tool, Series: 285B, Hog Ring/Square/Through Hole Drive, 1 in Drive, 700 bpm, 1475 ft-lb, 5250 rpm, 46/11 cfm, 90 psi Air, 1/2 in Air Inlet, Trigger Throttle, 3/4 in Minimum Hose Size, Metal Housing, D-Handle, 98.8/109.8/103.4/114.4 dBA, 14.2 in Overall Length, 7.2 in H x 8.1 in W

Ingersoll Rand, 285B-302, Throttle Valve Plunger, For Use With: Ingersoll Rand 285B Series Air Impact Wrench

Ingersoll Rand, 285B-333, Ball, For Use With: Ingersoll Rand 285B Series Air Impact Wrench

Ingersoll Rand, 285B-334, Replacement Part, Spring, For Use With: Ingersoll Rand 285B Series Air Impact Wrench

Ingersoll-Rand Air Impact Wrench, General Duty, Tool/Kit: Bare Tool, Series: 285B, Hog Ring/Square/Through Hole/6 in Extension Drive, 1 in Drive, 700 bpm, 100 to 900 ft-lb, 5000 rpm, 11 to 46 cfm, 90 psi Air, 1/2 in NPTF in NPTF Air Inlet, 3/4 in Minimum Hose Size, Aluminum Housing, D-Handle, 103.4/114.4 dBA, 20 in Overall Length

Ingersoll Rand, 285B-93A, Trigger, For Use With: Ingersoll Rand 285B Air Impact Wrench

Ingersoll Rand, 285B-A329, Reverse Valve, For Use With: Ingersoll Rand 285B Series Air Impact Wrench

Ingersoll-Rand Dead Handle, Angle, For Use With: 285B Series Air Impact Wrench

Ingersoll Rand, 285B-TK1, Tune-Up Kit, For Use With: Ingersoll Rand 285B Series Impact Wrench

Ingersoll Rand, 2934-302, TV Plunger, For Use With: Impact Wrench, Specifications: 1 in Drive Size

Ingersoll Rand, 2934-A827, Hammer Case Assembly, For Use With: Ingersoll Rand 2934 Series Impact Wrench

Ingersoll Rand, 2934B2, Air Impact Wrench, Tool/Kit: Bare Tool, Super Duty, Series: 2934, Square Drive, 1 in Drive, 750 bpm Blows per Minute, 1500 ft-lb Torque, 6600 rpm Speed, 47 cfm Air Flow, 1/2 in NPT Air Inlet, Trigger Throttle, 3/4 in Minimum Hose, Cast Iron Housing Material, D-Handle, 93.2, 104.2 dBA Sound Level, 11.25 in Overall Length

Ingersoll Rand, 2940-A703, Hammer Frame Assembly, For Use With: Ingersoll Rand 2940 Impact Wrench

Ingersoll Rand, 2950-42-7, Vane Pack, For Use With: Ingersoll Rand Power Tools

Ingersoll Rand, 2950-726, Anvil, Square, For Use With: Ingersoll Rand Impact Wrenches

Ingersoll Rand, 313-B, Angle Sander, Tool/Kit: Bare Tool, 5000 rpm, 0.5 hp, 7.5 cfm Air Flow, 90 psi Air, 1/4 in NPT Air Inlet, Front Exhaust Location, 3/8 in Minimum Hose, 94.3, 104.7 dBA Sound Level, 3.9 in H x 12.2 in L Dimensions

Ingersoll Rand, 32170979, Inlet Air Filter Element, For Use With: 16V888, 16V889, 16V898, 16V899, 1WF59, 1WF61, 1WF74, 4L976, 4L977, 4YW10 Air Compressors

Ingersoll Rand, 325SC4A, Die Grinder, Tool/Kit: Bare Tool, Series: G1, 1/4 in Collet, 25000 rpm Speed, 0.4 hp, Rear Exhaust Location, 3/8 in Minimum Hose, 6.5 in L Dimensions

Ingersoll Rand, 360-313, Pneumatic Belt Sander, Series: 360 Series, 3/8 in Belt Length, 13 in Belt Width, 20000 rpm Speed, 0.6 hp, 28.8 cfm Air Flow, 1/4 in NPT Air Inlet, Rear Exhaust Location, 5/16 in Minimum Hose, 101 dBA Sound Level, 3-3/8 in H x 3-1/2 in W x 12-3/8 in L Dimensions

Ingersoll-Rand Synthetic Lubricant, All Season Select, Series: EDGE Series™, 1 L

Ingersoll Rand, 3940-48, Dead Handle, For Use With: Ingersoll Rand 3940/3942/3955 Series Impact Wrench

Ingersoll-Rand Impact Wrench, Super Duty, Tool/Kit: Bare Tool, Series: 3900, Square/Through Hole Drive, 1 in Drive, 800 bpm, 1650/2500 ft-lb, 6000 rpm, 64 cfm, 90 psi Air, 1/2 in Air Inlet, Trigger Throttle, 3/4 in Minimum Hose Size, Titanium Housing, D-Handle/Pistol Grip, 100.6/111.6/103.4/114.4 dBA, 13-1/2 in Overall Length

Ingersoll Rand, 3956A2TI, Air Impact Wrench, Tool/Kit: Bare Tool, Series: 3956, Through Hole Drive, 1-1/2 in Drive, 700 bpm Blows per Minute, 5450 ft-lb Torque, 3600 rpm Speed, 145 cfm Air Flow, 1/2 in Air Inlet, Outside Trigger Throttle, 3/4 in Minimum Hose, D-Handle, 97.9, 98.8 dBA Sound Level, 16.68 in Overall Length

Ingersoll Rand, 3956B2TI, Air Impact Wrench, Tool/Kit: Bare Tool, Series: 3956, Through Hole Drive, 1-1/2 in Drive, 700 bpm Blows per Minute, 5450 ft-lb Torque, 3600 rpm Speed, 145 cfm Air Flow, 1/2 in Air Inlet, Inside Trigger Throttle, 3/4 in Minimum Hose, D-Handle, 97.9, 98.8 dBA Sound Level, 16.68 in Overall Length

Ingersoll Rand, 426, Air Reversible Cut-off Tool, Type 1 Heavy Duty, 3 in Wheel Diameter, 1-1/16 in Maximum Wheel Thickness, 20000 rpm Speed, 26 cfm Air Flow, 92.1 dBA Pressure Level/103.1 dBA Power Level Sound Level, 8.2 in L Dimensions

Ingersoll Rand, 444, Extended Angle Air Grinder, Tool/Kit: Bare Tool, 4 in Wheel Diameter, 14000 rpm Speed, 0.9 hp, 1/4 in Air Inlet, Rear Exhaust Location, 3/8 in Minimum Hose, Ergonomic Handle, 92.2, 103.2 dBA Sound Level, For Wheel Type: Type 27, 10.57 in L Dimensions

Ingersoll Rand, 50050475, Moil Point, For Use With: Ingersoll Rand Pavement Breaker & Diggers

Ingersoll Rand, 50114883, Chisel, 1-1/8 x 6 in Shank

Ingersoll Rand, 50197904, Chisel, Standard Duty, For Use With: General Demolition, 1-1/8 x 6 in Head Width, 1 in Overall Length

Ingersoll Rand, 508-97, Rear Motor Bearing, For Use With: Ingersoll Rand Power Tools

Ingersoll Rand, 5780-A724, Hammer Assembly, For Use With: Ingersoll Rand 5980 Impact Wrench

Ingersoll Rand, 7803A, Drill, Tool/Kit: Bare Tool, 1/2 in Chuck, 500 rpm Speed, 0.5 hp, 27 cfm Air Flow, Pistol Grip Handle, No Reversible, 9 in Overall Length

Ingersoll Rand, 7803RAKC, Drill, Tool/Kit: Bare Tool, 1/2 in Chuck, 500 rpm Speed, 0.5 hp, 27 cfm Air Flow, Pistol Grip Handle, Yes Reversible, 8.7 in Overall Length

Ingersoll Rand, 810-97, Front Rotor Bearing, For Use With: Ingersoll Rand Power Tools

Ingersoll Rand, 834-51-5, Spring Packet

Ingersoll Rand, 85H-167, Valve Seal, For Use With: Ingersoll Rand Air Drills/Impact Wrenches and Die Grinders

Ingersoll Rand, 9512, Retainer, Specifications: 0.401 in Shank

Ingersoll Rand, AG210-699A, Replacement Part, Collet Nut, For Use With: Ingersoll Rand G1 Series Angle/Belt Sander/G2 Series Air Grinder

Ingersoll-Rand Universal Charger, Bare Tool, For Use With: IQV12 and IQV20 Li-Ion Batteries, BL2022, BL2010, BL2012 and BL1203 Battery, Li-Ion Battery Type, 20/12 V AC Battery, 100/240 VAC Input, 20/12 VDC Output

Ingersoll Rand, BC1161, Charger, Universal, Li-Ion Battery, For Use With: BL4011 Batteries

Ingersoll Rand, BHD-30, Spring Balancer, Intermediate-Duty, Series: BHD, 55 to 66 lb Load, 6.5 ft Cable Length, 25.4 lb Reel Weight, Stainless Steel Cable, Aluminum Alloy Housing Material

Ingersoll Rand, BHD-55, Spring Balancer, Intermediate-Duty, Series: BHD, 99 to 121 lb Load, 6.5 ft Cable Length, 27.6 lb Reel Weight, Stainless Steel Cable, Aluminum Alloy Housing Material

Ingersoll Rand, BL2010-BOOT, Protective Boot, For Use With: Ingersoll Rand BL2010 & BL2022 IQV® Battery

Ingersoll Rand, BL2012, Battery, Series: IQV20, Lithium-ion Chemical System, 20 V Nominal, 2.5 Ah Nominal, 90 min Charging, For Use With: Ingersoll Rand Power Tools

Ingersoll Rand, BL4011, Battery, Series: IQV40, Lithium-ion Chemical System, 40 V Nominal, 2.5 Ah Nominal, For Use With: Ingersoll Rand Power Tools

Ingersoll Rand, BSD-120, Spring Balancer, Super Duty, Series: BSD, 220 to 265 lb Load, 8.2 ft Cable Length, 85.3 lb Reel Weight, Stainless Steel Cable, Aluminum Housing Material

Ingersoll Rand, D5241, Drill, Bare Tool/Kit: Bare Tool, Cordless, 1/2 in Chuck, Keyless Chuck, 2 Speed, 1100 in-lb Torque, 20 V, Li-Ion Battery, Yes Reversible, Pistol Grip Handle, 11 in H x 3.1 in W x 7.8 in L Dimensions

Ingersoll Rand, DG110-700-G4, Collet, For Use With: Ingersoll Rand 325XC4A Die Grinder

Ingersoll Rand, G1A200RS812, Sander, Series: G1, 1/2 in Belt Length, 12 in Belt Width, 20000 rpm Speed, 0.4 hp, 25 cfm Air Flow, 1/4 in NPT Air Inlet, Rear Exhaust Location, 3/8 in Minimum Hose, 83.6, 94.6 dBA Sound Level, 10.8 in L Dimensions

Ingersoll Rand, G4621-K22, Polisher/Sander Kit, Bare Tool/Kit: Kit, Cordless, 8300 rpm Speed, 20 V, Ergonomic Handle

Ingersoll Rand, H02-51-5, Spring Replacement Part, For Use With: Ingersoll Rand AVC Series Riveter, 5-Pack

Ingersoll Rand, H3111-K1, Cordless Heat Gun, Bare Tool/Kit: Kit, Portable, 10 cfm, Battery Power Source, Adjustable Temperature Setting, 1022 deg F, Pistol Grip Handle, Composite Housing Material, Temperature Lock: Yes, 8.7 in H x 3.2 in W x 6.9 in L Dimensions

Ingersoll Rand, H3R-203, Bumper, Rubber

Ingersoll Rand, H3R-31, Upper Buff Washer, For Use With: Ingersoll Rand A, W Series Chipping Hammer

Ingersoll Rand, HH1-1190, Retainer Replacement Part, For Use With: Ingersoll Rand A, W, D, MDT3-EU Series Chipping Hammer

Ingersoll Rand, HH1-1194, Lock Spring Replacement Part, For Use With: Ingersoll Rand A and W Series Chipping Hammer

Ingersoll Rand, HH-32, Dowel Pin, 5/16 in Diameter, 1-3/16 in Overall Length

Ingersoll Rand, HH-51, Valve Spring, For Use With: Ingersoll Rand A, W Series Chipping Hammer

Ingersoll Rand, HHW1-213, Assembly Replacement Part, For Use With: Ingersoll Rand A & W Series Chipping Hammer

Ingersoll Rand, KX050-10, Manual Chain Hoist, Series: SideKick, 0.5 ton Load, 10 ft Lifting Height

Ingersoll Rand, KX075-10, Manual Chain Hoist, Series: SideKick, 0.75 ton Load, 10 ft Lifting Height

Ingersoll Rand, KX075-5, Manual Chain Hoist, Series: SideKick, 0.75 ton Load, 5 ft Lifting Height

Ingersoll Rand, M2H250RG4, Die Grinder, Tool/Kit: Bare Tool, Series: M2H, 1/4 in Collet, 25000 rpm Speed, 1 hp, 25 cfm Air Flow, Rear Exhaust Location, 8.38 in L Dimensions

Ingersoll Rand, MC121-302, Valve, For Use With: Ingersoll Rand 772, 121 Series Hammer

Ingersoll Rand, NS11-20, Anvil, For Use With: Ingersoll Rand 172LNA1/182LNA1/172L/182G/182L Scaler

Ingersoll Rand, NS11-27, Replacement Part, Anvil Spring, For Use With: Ingersoll Rand 182L/172L Needle Scaler

Ingersoll Rand, NS11-A24, Needle Housing Assembly, Round, For Use With: Ingersoll Rand 172/182 Series Percussive Scaler

Ingersoll-Rand Cable Ratchet Puller, Single, Series: P Series, 2000 lb lb Lifting, 105 lb lb Pulling, 15 ft ft Cable Length, 3/16 in in Diameter Cable, Buttress Tooth/Slip-Resistant Grip Handle, Heavy Gauge Steel

Ingersoll Rand, PF2200-109, Valve Cap, For Use With: Ingersoll Rand 125/125CI Scaler

Ingersoll Rand, PF2200-49, Replacement Part, Throttle Valve, For Use With: Ingersoll Rand 125/125CI Scaler

Ingersoll Rand, PF2200-51, Replacement Part, Spring, For Use With: Ingersoll Rand 125 Air Percussive Needle Scaler

Ingersoll Rand, PF2200-52, Replacement Part, Gasket, For Use With: Ingersoll Rand 125/125CI Scaler

Ingersoll Rand, PF2200-53, Replacement Part, Stem O-Ring, For Use With: Ingersoll Rand 125/125CI Scaler

Ingersoll Rand, PF2219-24, Needle Housing, For Use With: Ingersoll Rand 125 Needle Scaler

Ingersoll Rand, PS3-67, Seal, For Use With: Ingersoll Rand HLK/MLK Hoist and 231 Series Impact Wrench

Ingersoll Rand, PT030-8, Manual Push Trolley, Series: PT, 3 ton Load, Fits Beam Height: 7 in, 42 in Minimum Radius Curve

Ingersoll Rand, PT050-8, Manual Push Trolley, Series: PT, 5 ton Load, Fits Beam Height: 8 in, 60 in Minimum Radius Curve

Ingersoll Rand, R000A2-103, Buffer Washer Ring, For Use With: Ingersoll Rand A, W Series Chipping Hammer

Ingersoll Rand, R00BR-210, Gasket, For Use With: Ingersoll Rand 1712/280/2934/2940/2945/2950/3934/3940/3942/3950/3955 Impact Wrench

Ingersoll Rand, R0B1J61-565, Bushing, For Use With: Ingersoll Rand AV11 Rammer

Ingersoll Rand, R1-271, Plunger Spring, For Use With: Model 172 And 182 Series Air Percussive Scaler

Ingersoll Rand, R1602-61, Inlet Screen, For Use With: Ingersoll Rand M2 & G3 Series Sander/Grinder

Ingersoll Rand, RR10010S, Retainer Kit, For Use With: Ingersoll Rand QM9 Electric Nutrunner

Ingersoll Rand, RR10020S, Socket Retainer, For Use With: Ingersoll Rand Impact Wrench

Ingersoll Rand, TB3, Tool Bag, Long

Ingersoll-Rand Chipping Hammer, Heavy Duty, Series: W Series, 19-1/4 in Overall Length, Swan Neck Handle

Ingersoll Rand, W7152, Impact Wrench Kit, Bare Tool/Kit: Bare Tool, Compact, Square Drive, 1/2 in Drive, 2450 bpm Blows per Minute, 1500 ft-lb Torque, 1900 rpm Speed, 20 V DC, Lithium-ion Battery, 5 Ah Battery, Battery Included: No, Steel Housing Material, Variable Speed Trigger Switch Control, 8.1 in Overall Length

Ingersoll Rand, W7152-K22, Impact Wrench Kit, Bare Tool/Kit: Bare Tool, Compact, Square Drive, 1/2 in Drive, 2450 bpm Blows per Minute, 1500 ft-lb Torque, 1900 rpm Speed, 20 V DC, Lithium-ion Battery, 5 Ah Battery, Battery Included: No, Steel Housing Material, Variable Speed Trigger Switch Control, 8.1 in Overall Length

Ingersoll Rand, W9691-K4E, Impact Wrench Kit, Bare Tool/Kit: Bare Tool, Compact, Square Drive, 1 in Drive, 3000 bpm Blows per Minute, 3000 ft-lb Torque, 1170 rpm Speed, 20 V DC, Lithium-ion Battery, Battery Included: No, Ergonomic Handle, Variable Speed Trigger Control, 26.1 in Overall Length, 6.9 in W Dimensions

Ingersoll Rand, WF171-15, Pin, For Use With: Ingersoll Rand HLK and MLK Series Air Hoist

Ingersoll Rand, WF171-2, Valve, For Use With: Ingersoll Rand 172 Series Needle Scaler

Ingersoll Rand, WF171-49, Throttle Valve, For Use With: Ingersoll Rand 172LNA1/172K1/172L Scaler

Ingersoll Rand, WF181-5, Piston, For Use With: Ingersoll Rand 182 Series Chisel Scalers

Ingersoll Rand, WF182-30A, Sleeve, For Use With: Ingersoll Rand 182L/182G Scaler

Ingersoll-Rand Air Hammer Kit, General Duty Round, Kit, Series: 121, 3/4 in Bore, 3000 bpm Blows per Minute, 2-9/32 in Stroke Length, 3 cfm Average, 15 cfm at Load Air Flow, 90 psi Air, 1/4 in NPTF Air Inlet, 3/8 in Minimum Hose, Pistol Grip Handle, 7-5/8 in L Dimensions