Walter Surface Technologies
Drillco 91SE001 9100SE Imperial Pilot Pin, For Use With 1/2 to 2-1/4 in Dia Annular Cutter, HSS
Drillco Pilot Pin, Imperial, Series: 9100SE, For Use With: 1/2 to 2-1/4 in Dia Annular Cutter, 1 in Depth of Cut, HSS
Call for pricing
Total Stock Available : 4 |
Walter Surface Technologies COOLCUT™ 15X603 15-X Sanding Disc, 6 in Dia Disc, 7/8 in Center Hole, 36 Grit, Coarse Grade, Ceramic Abrasive, Arbor Attachment
Walter Surface Technologies COOLCUT™ Sanding Disc, Series: 15-X, 6 in Diameter Disc, 7/8 in Center Hole, 1 Vacuum Holes, 36 Grit, Coarse Grade, Ceramic Abrasive, Fiber Backing, Arbor Attachment, Applicable Materials: Alloys, Aluminum, Carbon Steel and Stainless Steel, 10200 rpm Maximum, Orange
Call for pricing
Total Stock Available : 25 |
Magnum 7L124ADC 7000L Carbide Burr, Radius End, Taper Head, 3/8 in Dia Head, 1-1/16 in L of Cut, Double Cut
Magnum Carbide Burr, Series: 7000L, Radius, 3/8 in Head Dia, 1-1/16 in Length of Cut, Taper Head Shape, Double Cut Type, 1/4 in Shank Dia, Solid Carbide Head, 14 deg Included Angle, 40000 rpm Maximum, Applicable Materials: Aluminum, Brass, Cast Iron, Copper, Magnesium Plastics, Steel and Stainless Steel, SL-3 Industry Specification
Call for pricing
Total Stock Available : 10 |
Drillco 20A140FB 2000 Straight Flute Tap, Right Hand Cutting, 5/8-18 Thread, H3 Thread Limit, Bottoming Chamfer, 4 Flutes, Uncoated, HSS
Drillco Straight Flute Tap, Series: 2000, Measurement System: Imperial, UNF, 5/8-18, Bottoming Chamfer, 4 Flutes, HSS, Uncoated, Right Hand Cutting, 1-13/16 in Thread Length, 3-13/16 in Overall Length, H3 Thread Limit
Call for pricing
Total Stock Available : 0 |
Drillco 20A156CB 2000 Straight Flute Tap, Right Hand Cutting, 7/8-9 Thread, H4 Thread Limit, Bottoming Chamfer, 4 Flutes, Uncoated, HSS
Drillco Straight Flute Tap, Series: 2000, Measurement System: Imperial, UNC, 7/8-9, Bottoming Chamfer, 4 Flutes, HSS, Uncoated, Right Hand Cutting, 2-7/32 in Thread Length, 4-11/16 in Overall Length, H4 Thread Limit
Call for pricing
Total Stock Available : 0 |
Drillco 300A104 Type C Heavy Duty Stub Length Screw Machine Length Drill, 1/16 in Drill - Fraction, 0.0625 in Drill - Decimal Inch, HSS, Black Oxide
Drillco Screw Machine Length Drill, Type C Heavy Duty Stub Length, Series: 300, Imperial, 1/16 in Drill - Fraction, 0.0625 in Drill - Decimal Inch, 1-5/8 in Overall Length, 5/8 in Cutting Depth, Spiral Flute, 5/8 in Flute Length, Straight Shank, 135 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Black Oxide, Applicable Materials: Stainless Steel and Titanium
Call for pricing
Total Stock Available : 48 |
Refine